infrared remote control receiver module IRM-36XXL series everlight electronics co., ltd. http:\\www.everlight.com rev 1 page: 1 of 10 device no szdmo-036-119 prepared date 31-jan-2008 prepared by huayan.peng features ? photo detector and pream plifier in one package ? internal filter for pcm frequency ? improved inner shielding agains t electrical field disturbance ? ttl and cmos compatibility ? low power consumption ? improved immunity against ambient light ? suitable burst length ? 10 cycles/burst R ? pb free ? the product itself will remain w ithin rohs compliant version. ? vide operating supply voltage 2.7v?5.5v(min 2.3v operating) ? output active low descriptions the IRM-36XXL is miniaturized receivers for infrared remote control systems. pin diode and preamplifier are assembled on lead frame, the epoxy package is designed as ir filter. the demodulated out put signal can directly be decoded by a microprocessor.IRM-36XXL is the standard ir remote control receiver series, supporting all majo r transmission codes. applications ? light detecting portion of remote control ? av instruments such as audio, tv, vcr, cd, md, etc. ? home appliances such as air-conditioner, fan , etc. ? the other equipments with wireless remote control. ? catv set top boxes ? multi-media equipment part material color chip silicon black compound epoxy black
infrared remote control receiver module IRM-36XXL series everlight electronics co., ltd. http:\\www.everlight.com rev 1 page: 2 of 10 device no szdmo-036-119 prepared date 31-jan-2008 prepared by huayan.peng package dimensions unit:mm notes: 1.all dimensions are in millimeters. 2.tolerances unless dimensions 0.3mm. available types for diff erent carrier frequencies type carrier frequencies (typ) irm-3636l 36 khz irm-3638l 38 khz
infrared remote control receiver module IRM-36XXL series everlight electronics co., ltd. http:\\www.everlight.com rev 1 page: 3 of 10 device no szdmo-036-119 prepared date 31-jan-2008 prepared by huayan.peng absolute maximum ratings (ta=25 ) parameter symbol rating unit notice supply voltage vcc 0~6 v operating temperature topr -20 ~ +80 storage temperature tstg -40 ~ +85 soldering temperature tsol 260 4mm from mold body less than 10 recommended operati ng condition supply voltage rating: vcc 2.7v to 5.5v electro-optical characteristics (ta=25 , and vcc=3v) parameter symbol min. typ. max. unit condition consumption current icc --- 0.33 0.48 ma no signal input peak wavelength p --- 940 --- nm l 0 14 --- --- reception distance l 45 6 --- --- m half angle(horizontal) h --- 45 --- deg at the ray axis *1 half angle(vertical) v --- 45 --- deg high level pulse width t h 400 --- 800 s low level pulse width t l 400 --- 800 s at the ray axis *2 high level output voltage v h 2.7 --- --- v low level output voltage v l --- --- 0.5 v notes: *1:the ray receiving surface at a vertex and relation to the ray axis in the range of = 0 and =45 . *2:a range from 30cm to the arrival dist ance. average value of 50 pulses.
infrared remote control receiver module IRM-36XXL series everlight electronics co., ltd. http:\\www.everlight.com rev 1 page: 4 of 10 device no szdmo-036-119 prepared date 31-jan-2008 prepared by huayan.peng carrier frequency is adjusted to center frequency of each product. ir tansmitter output wave form output pulse of device fig.-1 transmitter wave form d.u.t output pulse test method the specified electro-op tical characteristics is sa tisfied under the following conditions at the c ontrollable distance. c measurement place a place that is nothing of extreme light reflected in the room. d external light project the light of ordinary wh ite fluorescent lamps which are not high frequency lamps and must be less then 10 lux at the module surface. (ee Q 10lux) e standard transmitter a transmitter whose output is so adjusted as to vo=400mvp-p and the output wave form shown in fig.-1.according to the measurement method shown in fig.-2 the standard transmitter is specified. however , the infrared photodiode to be used for the transmitter should be p=940nm, ? =50nm. (standard light / light source temperature 2856 k). f measuring system according to the measuring system shown in fig.-3
infrared remote control receiver module IRM-36XXL series everlight electronics co., ltd. http:\\www.everlight.com rev 1 page: 5 of 10 device no szdmo-036-119 prepared date 31-jan-2008 prepared by huayan.peng standard transmitter oscilloscope vout 10uf +5.0 0.1v 10k 20cm 1 0 0 k e e d.u.t l: transmission distance standard transmitter gnd vcc out vout : angle of horizontal & vertical direction block diagram application circuit rc filter should be conn ected closely between vcc pin and gnd pin. fig.-2 measuring method fig.-3 measuring system modulated ir signal min 10 pulses carrier frequency f0 out in vs gnd input cga & filter demodulator oscillator agc/atc & digital control c
infrared remote control receiver module IRM-36XXL series everlight electronics co., ltd. http:\\www.everlight.com rev 1 page: 6 of 10 device no szdmo-036-119 prepared date 31-jan-2008 prepared by huayan.peng the notice of application: transmission of remote control signal consist of four parts: encode part, ir transmitter source, irm device, decode part 1. when IRM-36XXL series code select frequency, it need to we ll understand the center system of encode part. 2. strong or weak light of ir trans mitter can affect distance of transmission. 3. when using IRM-36XXL series device, it require s the composition of code pattern to reach the demand as follows: minimum t burst ( number of pulses per burst) minimum t burst_gap ( number of pulses between two burst) minimum t pause 10pulses 14 pulses 20 msec 4. it needs to ensure the translation range of decode part if it is applied to the pulse-width range. if the above items hardly assure of its application, it?ll cause ng( no good) message from the edge of signal. IRM-36XXL series code property: data format data format nec o sony 12 bit o rc5 _ philips o sony 15 bit x rc6 _ philips o sony 20 bit x rca _ thomson x matsushita o toshiba o mitsubishi o sharp o zenith o jvc o high data rate (4000 bit/s) x
infrared remote control receiver module IRM-36XXL series everlight electronics co., ltd. http:\\www.everlight.com rev 1 page: 7 of 10 device no szdmo-036-119 prepared date 31-jan-2008 prepared by huayan.peng typical electro-optical characteristics curves fig.-4 relative spectral sensitivity vs. wavelength fig.-5 relative transmission distance vs. direction angle (deg) -20 relative transmission distance (%) -60 0 80 40 20 60 -40 020 60 40 fig.-6 output pulse length vs. arrival dist ance fig.-7 arrival dist ance vs. supply voltage output pulse widty twl (usec) transmission distance lc ( m ) 0 400 700 500 600 800 2 4 6 8 10 12 14 16 18 transmission distance lc (m) 3.8 supply voltage vcc (v) 2.7 0 3.3 3.0 3.5 4.4 4.1 4.7 5.0 5.3 5.5 17.5 10.5 7.0 3.5
infrared remote control receiver module IRM-36XXL series everlight electronics co., ltd. http:\\www.everlight.com rev 1 page: 8 of 10 device no szdmo-036-119 prepared date 31-jan-2008 prepared by huayan.peng typical electro-optical characteristics curves fig.-8 relative transmission distan ce vs. center carrier frequency irm-3636l irm-3638l typical electro-optical characteristics curves fig.-9 arrival distance vs. ambient temperature transmission distance lc (m) ambient temperature ta (c) -20 -40 0 20 40 60 100 80 4 8 16 12 20 0
infrared remote control receiver module IRM-36XXL series everlight electronics co., ltd. http:\\www.everlight.com rev 1 page: 9 of 10 device no szdmo-036-119 prepared date 31-jan-2008 prepared by huayan.peng reliability test item and condition the reliability of products shall be satisfied w ith items listed below. confidence level 90% ltpd 10% test items test conditions failure judgement criteria samples(n) defective(c) temperature cycle 1 cycle -40 +100 (15min)(5min)(15min) 300 cycle test n=22,c=0 high temperature test temp: +100 vcc:6v 1000hrs n=22,c=0 low temperature storage temp: -40 1000hrs n=22,c=0 high temperature high humidity ta: 85 ,rh:85% 1000hrs n=22,c=0 solder heat temp: 260 5 10sec 4mm from the bottom of the package. l 0 Q l 0.8 l 45 Q l 0.8 l: lower specification limit n=22,c=0
infrared remote control receiver module IRM-36XXL series everlight electronics co., ltd. http:\\www.everlight.com rev 1 page: 10 of 10 device no szdmo-036-119 prepared date 31-jan-2008 prepared by huayan.peng packing quantity specification 1. 1500 pcs/1box 2. 10 boxes/1carton label form specification cpn: customer?s production number p/n : production number qty: packing quantity cat: ranks hue: none ref: reference lot no: lot number made in taiwan: production place notes 1. above specification may be changed without notice. everlight will reserve authority on material change for above specification. 2. when using this product, please observe the ab solute maximum ratings and the instructions for using outlined in these specification sh eets. everlight assumes no responsibility for any damage resulting from use of the product wh ich does not comply with the absolute maximum ratings and the instructions included in these specification sheets. 3. these specification sheets incl ude materials protected unde r copyright of everlight corporation. please don?t reproduce or cause anyone to reproduce them without everlight?s consent. IRM-36XXL everlight electronics co., ltd. tel: 886-2-2267-2000, 2267-9936 office: no 25, lane 76, sec 3, chung yang rd, fax: 886-2267-6244, 2267-6189, 2267-6306 tucheng, taipei 236, taiwan, r.o.c http:\\ www.everlight.com
|
